• Controller for
heating a swimming pool by means of solar collectors and
optimised operation of the filter system
.
• Solar operating hours counter and heat quantity balancing
• 4 sensor inputs
• 2 relay outputs
• Function control
• RESOL VBus
®
Included:
1 x
D e lt a S o l
®
MiniPool
1 x accessory bag
1 x spare fuse T1,25A
2 x screws and wall plugs
4 x strain relief and screws
Additionally included with the full kit:
1 x FKP6 sensor
2 x FRP6 sensor
Technical data
Housing: plastic, PC-ABS and PMMA
Protection type: IP 20 / DIN 40 050
Ambient temperature: 0 ... 40 °C
Dimensions: 172 x 110 x 49 mm
Mounting: wall mounting, mounting
into patch panels is possible
Display:
graphic display, 160 x 64 px
Operation: 3 push buttons at the
front
Functions:
controller for heating a
swimming pool by means of solar ab-
sorbers in combination with the opti-
mised operation of the filter system.
Solar loading:
When the absorber temperature is by
an adjusted value higher than the pool
temperature, solar loading starts. If
the difference between flow and pool
falls below a certain value, or if the
maximum temperature is reached, solar
loading is stopped.
Sensor inputs: 4 inputs for Pt1000
sensors
Relay outputs: 2 relay outputs
Bus: RESOL VBus
®
Power supply: 220 … 240 V~
Total switching capacity:
4 (1) A (220 … 240) V~
Rated impulse voltage: 2,5 kV
Mode of operation: type 1.B
Switching capacities:
2 (1) A (220 … 240) V~
(standard relay)
1. Overview
D e lt a S o l
®
MiniPool
© RESOL 09225 DeltaSol_MiniP
ool.monen.ind
d
3
|