Resol DeltaSol C/4 Manual Download Page 2

D e lt a S o l

®

 

C/4

© RESOL 11103 deltasol_c/4.monen.ind

d

|

 

2

Table of contents
Safety advice... ...................................................................................... 2
Overview of functions and technical data........ ............................ ......3
1. 

Installation ................................................................................ 4

1.1 

Mounting .......................................................................................................... 4

1.2 

Electrical connection .................................................................................... 5

1.2.1 

Standard solar system................................................................................... 5

1.2.2 

Solar system and afterheating ..................................................................... 6

2. 

Operation and function ........................................................... 6

2.1 

Buttons for adjustment ................................................................................ 6

2.2 

System Monitoring display ........................................................................... 7

2.2.1 

Channel display .............................................................................................. 7

2.2.2 

Toolbar ............................................................................................................. 7

2.2.3 

System-Screen ................................................................................................ 7

2.3 

Flashing codes ................................................................................................. 8

3. 

Commissioning ........................................................................ 9

4. 

Control parameters and and display channels ................... 10

4.1 

Overview of channels .................................................................................10

4.1.1-7  Display channels ...........................................................................................11
4.1.8-20 Adjustment channels ...................................................................................12

5. 

Troubleshooting ..................................................................... 16

5.1 

Various ...........................................................................................................17

6. 

Accessory ............................................................................... 19

Imprint ................................................................................................ 20

Subject to change. Errors excepted

Safety advice

Please pay attention to the following 
safety advice in order to avoid danger 
and damage to people and property.

Appropriate usage

This product is to be used in simple  
solar thermal systems in com pliance 
with the technical data specified in 
these instructions.
Improper use excludes all liability 
claims

Instructions:

Attention should be paid to
- valid local regulations
- the statutory provisions for preven-

tion of industrial accidents,

- the statutory provisions for environ-

mental protection,

- the Health and Safety at Work Act 

1974

- Part P of the Building Regulations 

2005 

- BS7671 Requirements for electrical 

installations and relevant safety re-
gulations of DIN, EN, DVGW, TRGI, 
TRF and VDE.

These instructions are exclusively 
addressed to authorised skilled per-
sonnel. 
- Only qualified electricians should 

carry out installation and mainte-
nance work.

- Initial installation should be carried 

out by named qualified personnel

Declaration of conformity

We,  RESOL  Elektronische  Regelungen  GmbH,  D-45527  Hattingen,  declare  
under our sole responsibility that our product 

D e lt a S o l

®

 C complies with 

the following standards:
EN 55 014-1 

 

EN 60 730-1
According to the regulations of the above directives, the product is labelled 
with 

:

89/336/EWG 

 

73/ 23/EWG

Hattingen, 07.October 2007 

 

RESOL Elektronische Regelungen GmbH,

ppa. Gerald Neuse

Summary of Contents for DeltaSol C/4





















Reviews: