background image

22

Your clinician can set any of the following reminders on your LCD:

* “CALL CLINICIAN” in some countries.

Message

Description

Action

INSERT CARD

May appear if your 
device is Data Card 
enabled. 

Insert your Data Card (see Section 

H

 of the 

illustrations sheet) and follow any instructions 
that your clinician has given you. When you 
have done this, the message will disappear 
from the LCD. Pressing the 

Left

 (Ok) key will 

also remove the message.

REPLACE 
MASK

May appear when 
your mask is due 
for replacement. 

Press the 

Left

 (Ok) key to remove the message 

from your LCD, and replace your mask with a 
new one.

CALL 
PROVIDER

*

May appear as a 
reminder to contact 
your clinician; for 
example to discuss 
how your therapy is 
going.

Press the 

Left

 (Ok) key to remove the message 

from your LCD, and contact your clinician.

REPLACE 
FILTER

May appear as a 
reminder to replace 
the air filter on your 
device.

Press the 

Left

 (Ok) key to remove the message 

from your LCD, and replace the air filter.

SERVICE DUE

May appear as a 
reminder to return 
your device for 
service.

Press the 

Left

 (Ok) key to remove the message 

from your LCD.

Customised 
messages

Your clinician may 
also set reminders 
for other reasons; 
for example to 
return equipment 
or to call a 
particular person or 
number.

Press the 

Left

 (Ok) key to remove the message 

from your LCD.

Summary of Contents for S8 AutoSet Spirit



















































Reviews: