background image

4

Note: 

If required, the External Battery DC output cable can be 

connected into the DC input port of the Astral device while the 

External Battery is charging. The Astral device will then continue 

to operate using mains power.
3. A fully charged External Battery is indicated by  . To 

discontinue charging, disconnect the External Battery from 

the AC power cable.

Powering on the External Battery

To power on the External Battery:

 

• Connect it to an Astral device that is powered on or;

 

• Press 

 .

Note: 

The External Battery automatically powers off after 5 

minutes of inactivity.

Using and recharging the External Battery

When connected to Astral and mains power, the External 

Battery recharges (refer to the Charging sequence section in this 

guide).

Using and recharging with the Astral device

Connecting a fully charged External Battery to the Astral device 

can provide 8 hours of power during typical use. 

Refer to illustration B.

1. Connect the External Battery DC output cable into the DC 

input port of the Astral device.

2. Connect the AC power supply cable to the DC input port of 

the External Battery.

3. Plug the other end of the AC power supply cable into the 

mains power outlet. The AC mains indicator on the Astral 

interface will illuminate.

Using two External batteries with the Astral device

A second fully charged External Battery can be connected to the 

Astral device to provide a further 8 hours of power during typical 

use. A maximum of two External batteries can be connected to 

the Astral device.

 CAUTION

Do not attempt to connect more than two external batteries. 
Battery specific messages and alarms on the Astral device 
will not operate for any additional units.
Refer to illustration C.

1. Connect the first External Battery DC output cable into the 

Astral DC input port.

2. Connect the second External Battery DC output cable into the 

DC input port of the first External Battery.

3. Connect the AC power supply cable to the DC input port of 

the second External Battery.

4. Plug the other end of the AC power supply cable into the 

mains power outlet. 

Summary of Contents for Astral External Battery
















Reviews: