T6R-HW-EN0H 8604 NL01 R1020
PRODUCT SPECIFICATION SHEET
T6R-HW
SMART THERMOSTAT WITH HOT WATER CONTROL
FEATURES
•
Attractive, ultra-modern styling makes it ideal for any
location in any type of home.
•
Table stand thermostat to fit a new and replacement
installations.
•
For control of central heating and stored hot water systems
•
Suitable for Sundial S, Y and W plan stored hot water
systems (on/off)
•
Wi-Fi communication to connect to the Internet
-
Smart Home and Apple HomeKit ready
•
Honeywell Home mobile App for:
-
Remote view and change of settings of heating and
hot water
-
Schedule changes
-
Smartphone Geolocation temperature control
•
A dynamic text display on the LCD that gives enhanced
feedback to the user / installer.
•
High LCD Contrast and backlighting for easier viewing in all
light conditions.
•
Time out screen with selectable brightness
•
Heating control:
-
Factory programmed daily or 5+2 default schedule
-
Schedule with up to 6 independent time and temperature
pairs to suit the comfort needs.
-
“Hold until” temperature override of programmed schedule
temperature till the next switch point.
-
Schedule off mode for manual operation.
-
Setpoint and room temperature always displayed.
-
OFF position has an integral frost protection setting at
minimum 5
°
C so that pipes in the house will never freeze in
winter.
The
T6R-HW
smart thermostat is designed to provide
automatic time and temperature control of heating and
stored Hot water systems in homes and apartments.
It’s compatible with 24-230V on/off appliances such as
gas boilers,
OpenTherm®
combi-boilers and heat pump.
Also, works with zone valve applications and is suitable for
Sundial S, Y and W plan stored hot water systems (on/off).
Not with electric heating (240V).
The T6R-HW is for table stand installations (wireless), and
consist of a thermostat and a Receiver box.
The solution is designed with the installer in mind and
includes a 2-channel Receiver module with mounting
options for directly on the wall or on a wall box. Wiring can
be from below or from the back by lifting the terminal
platform, which makes installation quick and easy.
The thermostat has a high contrast PMVA display with
dynamic text line and touch screen buttons. The
thermostat has a simple programming philosophy to make
it easier to install and very user friendly.
The T6 is ideal for consumers who want to control their
comfort and hot water remotely and is based on a modern
design, which is simple to program and easy to use.
•
Hot water control:
-
Factory programmed daily or 5+2 default schedule.
-
Schedule with up to 3 ON periods per day to suit the
comfort needs.
-
Hot water Boost function for temporary override
•
Alert messages to assist in fault-finding.
•
2-channel Receiver box with clear LED indications and
override buttons (heating and hot water)
-
A flip up wiring platform for easy wiring
-
On/Off compatible heating control.
•
User menu allows extra functions to be set at the discretion
of the user:
-
Language selection
-
Wi-FI setup
-
Optimisation
-
Clock setting
-
Resetting the heating program to factory default
-
Brightness
-
Temperature offset
-
Lock function
•
Advanced menu (Installer Set-Up) allows extra functions to
be set at the discretion of the installer to match the
consumers applications and needs:
-
Language selection
-
System type
-
5+2 or daily schedule option
-
Upper / Lower Set point Limit Adjust
-
Minimum ON time
-
Cycle rate
-
Factory Reset
-
Binding (wireless version)
•
Pre-configured and bound system pack
