Summary of T4 operating modes:
Mode
Input signals
Output signals Big Knob controls
Stereo Mix mode
(only Outputs 1 & 2 connected)
Using the T4 Digital Panel
The T4 Digital Panel software is installed automatically during driver installation (Mac users will find it
in their Applications folder; Windows users will find it in their Toolbar) and provides onscreen metering
as well as allowing you to set output levels for each of the four channels individually. Simply “grab” and
move each slider with your mouse to make adjustments. The two channel pairs (1 & 2 and 3 & 4) can be
ganged together for easy stereo control if desired; just click on the “GANG/UNGANG” area of the
display.
9
Routed to Outputs 1 & 2*,
PHONES jack and Output 3 (as
per setting of Input Mix control)
in mono or stereo (as per setting
of INST/LINE switches**)
Mixed in stereo and routed
to Outputs 1 & 2, PHONES
jack and Output 3
Monitor level and
headphone level(s)
(PHONES jack and/or
Output 3)
Multichannel mode
(Output 4 connected)
Routed to PHONES jack only
(as per setting of Input Mix
control) in mono or stereo (as per
setting of INST/LINE switches**)
Routed to corresponding
Output jacks
(in mono)
and
PHONES jack
Headphone level only
(PHONES jack)
* Outputs 1 & 2 are muted if headphones are connected to Output 3.
** See Smart Monitoring on page 11 in this manual for more information.
Resident Audio T4 Operation Manual : Making Connections