resi-linx.com
Page 6
Front
‐
Panel
Buttons/LEDs
Description
Reboot button
Reboots the device (unsaved settings will be lost)
RST / UPG button
To reset all the settings of the device to factory default:
1.Press and hold the RST/UPG button and boot-up the device
2.Hold the button until CFG led to flashes 10 times (about 10 seconds)
3.After the CFG led stops flashing release the button
To upgrade firmware using the USB port:
1.Plug-in the USB drive with the upgraded firmware image
(“hdip_upg.img”)
2.Press and hold the RST/UPG button and boot-up the device
3.USB led will flash while copying the image from USB drive (about 3~5
seconds)
4.Wait until the CFG led stop flashing
5.Release the RST/CFG button and wait for the device to reboot and
upgrade the firmware (about 1 minutes)
PWR
Power is ON
CFG
Indicates device is in configuration mode
USB
Indicates USB drive is mounted
MPEG-2
Indicates device is encoding video using MPEG-2
AVC
Indicates device is encoding video using AVC
MP2
Indicates device is encoding audio using MPEG-1 Layer 2
AAC
Indicates device is encoding audio using AAC
AC-3
Indicates device is encoding audio using AC-3
