13
4 Operation
4.10 Control panel
1. The Function button (1) is used to activate the
filling/heating of the machine’s water tank.
2. The Stop button is used to reset any alarms.
It is also used to put the machine in standby
mode. After 30 seconds, the display turns off
and the machine enters standby mode. The
Stop button’s red LED remains lit to indicate
standby mode, but all machine functions/
activities stop.
Press the function button twice to bring the
machine out of standby mode and begin
heating of wash tank.
Important Note:
We recommend that the
machine be put in standby mode if it does not
need cleaning at the end of the day. The main
power can be left on for easy startup the next
day. The main power should only be turned
off when doing the weekly cleaning or during
service.
In STOP mode the wash and rinse tanks are
not heated.
3. Short program for gloves and boots.
4. Long program for SCBA, helmets and face
masks.
1
2
3
4
