background image

Charging the battery

The Ventilation Disinfector includes a rechargeable battery. For charging 

the battery, connect the product as shown in the illustration - connect the 

USB cable to charging port and power adaptor. Insert the power adaptor 

into a power outlet. 

The 2000 mAh rechargeable batteries meets most of the airlines restriction.

It is recommended to sanitize the CPAP, tubing and mask weekly.

For the best lithium battery performance and  battery life, set the power 

off while it is at charging. Charging indicator turns red when it is at 

charge.Charging indicator turns green when charging is completed. 

The time required to recharge the battery will vary greatly depending on 

the ambient temperature and the battery’ s remaining capacity. If the 

battery becomes exhausted quickly even after being fully charged, the 

battery has reached the end of its service life.
Low Power indication : When the battery is running low, Working 

indicator blinks along with long buzzer sound. The disinfector will 

continue to operate till the battery charge is completed used up; however, 

it does not warrant a complete 35 minutes sanitization cycle. 

Recommend user charges up the disinfector once the working indicator 

flashes.   

For the CPAP machine configured with humidifier, drain water in reservoir 

before starting the sanitization process.
After Sanitization process, wait for an hour before using the CPAP for 

ensuring no ozone residue odour.

The user can turn on the CPAP after sanitization to remove the residue 

ozone odour. If wants to shorten the residue ozone removal time, the user 

can order a calibrator cap putting on the CPAP tubing end for forcing the 

residue ozone odour clear out.
Ozone concentration is designed by the disinfector design, enclosing 

container and sanitaization time. The machine design is based on the 

best sanitization performance. User is not recommended to change any 

settings.

RESCOMF offers a 1 year warranty on the product commencing on the date 

of purchase. For related accessories warranty period is 90 days.
The warranty does not cover damage due to improper use and normal wear.

The warranty only covers defects in the prduct resulting from faults in material 

or workmanship, free of charge either by repairing or replacing in the 

complete product at RESCOM discretion.

The warranty becomes VOID if repairs are undertaken by unauthorized 

persons and if original RESCOMF parts are not used. To obtain service 

within the warranty period,Please contact your distributor.

Limited Warranty

Important Notes

Summary of Contents for XD100






Reviews: