Requisite Audio Engineering L2M MKIII M/S VERSION Operator'S Manual Download Page 19

WARRANTY

For a period of 2 years after original purchase, Requisite Audio Engineering will, free of 
charge, repair this product if it fails due to defective materials or workmanship.  This 
limited warranty is subject to the following limitations:

• Units that are discovered to have been opened or tampered with will not be covered 

by this warranty.  We strongly discourage opening the chassis due to the risk of severe 
electrical shock!

• Defects that are, in the sole judgement of Requisite Audio Engineering, the result of 

accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, un-
authorized repair, modification, or act of God will not be covered by this warranty.

• In the absence of receipt of original purchase, this warranty is valid for 2 years from 

date of manufacture as determined from the units serial number and the records of 
Requisite Audio Engineering.

• There are no expressed warranties except as listed above.
• TUBES, OPTOS and LIGHT BULBS are not covered by this warranty, but receive a 90-

day warranty.

• REQUISITE AUDIO SHALL NOT BE LIABLE FOR PROPERTY DAMAGE OR ANY 

OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGE WHATSOEVER WHICH 
MAY RESULT FROM THE FAILURE OF THIS PRODUCT OR ARISING OUT OF THE 
BREACH OF THIS WARRANTY.  Any and all warranties of merchantability and fit-
ness implied by law are limited to the duration of the expressed warranty.  

If a problem develops with this product DO NOT OPEN THE UNIT or attempt repair-
ing it yourself.  Opening this unit invalidates your warranty and will expose you to risk 
of very severe electrical shock!

REFER ALL REPAIR TO REQUISITE AUDIO.  Do not return the unit without authoriza-
tion and instructions from us.  Units must be shipped PRE-PAID both directions.
REQUISITE AUDIO cannot be responsible for damage due to shipping or improper 
packaging.  Save the original packaging.

This warranty gives you specific legal rights and you may also have other rights which 
vary from state to state.

T H E   L 2 M   M K I I I     M / S   V E R S I O N

R e q u i s i t e   A u d i o   E n g i n e e r i n g

L 2 M   M k I I I

15

Summary of Contents for L2M MKIII M/S VERSION




















Reviews: