ReQuest Multimedia VideoReQuest, Protocol Manual, Page: 8 / 20

VideoReQuest Protocol Guide v1.1.2 - 5/18/04
Phone (518) 899-1254
•
Fax (518) 899-1251
•
www.request.com
-
2 -
P
ART
1: IR C
ONTROL
There are 2 ways to control the VideoReQuest via IR. The simplest method is to use a
handheld remote aimed at the IR receiver on the front of the unit. For more advanced
installations, there is a 1/8
th
inch mini jack on the rear of the unit for integration with IR
based control systems. No matter which method you choose, this portion of the document
will describe the commands available.
R e a r I R P i n o u t
The rear IR jack is designed for a 2 conductor 1/8
th
inch mini plug from a powered connecting
block or control system. You CAN NOT plug a dinkylink directly into the back of the
VideoReQuest.
2 Conductor Pinout
Tip Signal
Ring Ground
Sleeve Not Connected
L e a r n i n g I R C o d e s i n t o O t h e r S y s t e m s
For any advanced commands (2 button key combinations), the proper method for teaching
the system the VideoReQuest IR codes is as follows:
1. Aim the VideoReQuest Remote AWAY from the learner
2. Press AND HOLD the Alt or Shift button (depending on command)
3. Aim the remote AT the learner
4. Press the second button
5. Release BOTH buttons
Most advanced commands are written on the IR remote in GREEN text. To access these
commands, press and hold the
Alt button prior to pressing the desired command button.
Other advanced commands not written on the remote are listed in the table below.
L i s t o f A d v a n c e d I R C o m m a n d s
Action Description Alt/Shift 2 nd Button
Refresh DVD Details Performs a lookup on the current DVD ALT EDIT