![ReptiZoo NRK Series Instruction Manual Download Page 2](http://html1.mh-extra.com/html/reptizoo/nrk-series/nrk-series_instruction-manual_1443626002.webp)
1.
Please read the instructions carefully and follow the safety instructions before using this product
2.
Do not place the assembled terrarium in a wet or direct sunlight place, such as a bathroom or balcony
3. Move the terrarium with care and do not move it with wet hands. When moving the terrarium with
landscaping items inside, take notice that the internal items may fall obliquely and may cause damage to the
terrarium because of uneven stress
4.
This product can not be assembled by children alone and young children shall use the terrarium under
supervision and guidance of their guardian.
Optional side metal screen meshes
8. Firstly unlock the sliders on front bar, and then assemble
the left and right doors in the direction of the arrow
9. Assemble Cable pass
Lift up the left and
right sliders on front
bar at the same time
11. Lock mesh cover to the terrarium
with latches as the picture shown
12.Install rubber caps on the terrarium
10. Unlock mesh cover latches in 1-4
spot and place horizontally on the
top of the terrarium
1
4
2
3
Note: The left and right glass
panels can be taken out and
replaced by other materials of
the same size, such as mesh.
side glass and side mesh
(3 combinations are shown below )
or
or
Special Notice:
The left and right glass panels
can be taken out and replaced
by other materials of the same
size, such as mesh.
During replacing, Assemble
glass or mesh into the grove of
upper edge and installed into
the lower edge, then lock the
upper wrench.
Rotate the side wrench upward
to form a 90 degrees angle
with the mesh cover
• Installation method of side glass
A
A
B1
B2
B
B2
B1
Cable pass consists of 3 parts A/B1/B2
Align the arrow
and install A in to B
Follow the direction
“CLOSE” and rotate it
to lock
Put B1 outside of terrarium
and B2 inside of terrarium
and then rotate B2 clockwise
to fasten the whole part B
0.4In
0.4In
Warning
!
THE DISTANCE BETWEEN TOP MESH AND
DOME LAMP MUST BE MINIMUM 0.4 INCHES,
OR IT WILL CAUSE MESH BURING DUE TO
OVERHEATING.
Safety and maintenance
No.3 JinXingEr Road, Qingxi Town,
Dongguan City, Guangdong Province,
China. 523655