18
Wireless Client Table" will pop up. You can see the
status of all active wireless stations that are connecting
to the access point
.
Enable Universal
Repeater Mode
Mark this checkbox to enable Universal Repeater Mode
which acts this device as an AP and client
simultaneously.
SSID of Extended
Interface
While you enable the Universal Repeater Mode, you
have to specify an SSID for the extended interface.
Click
<Apply changes>
button at the bottom of the screen to save the
above configurations. You can now configure other advance sections or
start using the router (with the advance settings in place)
Active Wireless Client Table
This is the window that pops up after clicking the
“Show Active Clients”
button.
MAC Address
MAC address of this active wireless station.
Tx Packet
The number of transmitted packets that are sent out
from this active wireless station.
Rx Packet
The number of received packets that are received by
this active wireless station.
