3.
Software Configuration
The DSL device is an ADSL2+ wireless router. When you power on the device, the system
will boot up and connect to ADSL automatically. The default configurations for the system
are listed below.
LAN IP address: 192.168.1.1,
NetMask:255.255.255.0
Wireless SSID: ADSL_Modem_Router
User can change settings via WEB browser. The following sections describe the set up
procedures. Please set your PC’s Ethernet port as follow:
IP address: 192.168.1.XXX
NetMask:255.255.255.0
Start your web browser. Type the Ethernet IP address of the modem/router on the address bar
of the browser. Default IP address is 192.168.1.1. The
Enter Network Password
dialog box
appears. Type the user name and password and then click OK.(
default user name :
admin
;
default password :
admin
) Once you have connected to ADSL2+ router. You will see the
status page.
This page displays the ADSL modem/router’s current status and settings.
