Repotec RP-WR0254, User Manual

Page: 19 / 52

18
Encryption: WEP
If WEP is selected, users will have to Set WEP keys either manually, or select to Use 802.1x
Authentication to make the RADIUS server to issue the WEP key dynamically.
SET WEP KEY
Click the Set WEP Keys will prompt you a
window to set 64bit or 128bit Encryption.
Select HEX if you are using hexadecimal
numbers ( 0-9, or A-F ). Select ASCII if you are
using ASCII characters ( case-sensitive ).
Ten hexadecimal digits or five ASCII
characters are needed if 64-bit WEP is used;
26 hexadecimal digits or 13 ASCII characters
are needed if 128-bit WEP is used.
Encryption: WPA (TKIP)
WPA (TKIP): If WPA is selected, users will have to select the Authentication modes between
Enterprise (RADIUS) and Personal ( Pre-shared Key) .
Pre-shared Key Pre-Shared-Key serves as a password. Users may key in a 1
to 63 characters string to set the password or leave it blank, in
which the 802.1x Authentication will be activated. Make sure
the same password is used on client's end.
There are two formats for choice to set the Pre-shared key, i.e.
Passphrase and Hex . If Hex is selected, users will have to
enter a 64 characters string. For easier configuration, the
Passphrase (at least 8 characters) format is recommended.
Group Key Life Time Enter the number of seconds that will elapse before the group
key change automatically. The default is 86400 seconds.
Enable Pre- The two most important features beyond WPA to become