2
3.
Hardware Installation
1. Connect the Power Cord to the RP-G1416D and then to a power outlet.
2. Connect a Cat.5e or Cat.6 RJ-45 network cable from the computer to anavailable Ethernet
port on the RP-G1416D
3. Move the power switch to the On position.
Notice
The cable distance between 16 port Switch and other IEEE802.3 compatible network device should not
exceed 100 meter. Make sure the wiring is correct. It can be used Category 3/4/5 cable in 10 Mbps
operation. To reliably operate your network at 100Mbps, you must use an Unshielded/Shielded
Twisted-Pair (UTP/STP) Category 5 cable, or better Data Grade cabling. While a Category 3 or 4 cable
may initially seem to work, it will soon cause data loss. All kinds of IEEE802.3 compatible network device
(Hub, Switch, PC) can connect to Switch by using straight-through wires or crossover wires because of
Switch's auto MDIX function.
4.
LEDs
PWR (Power)
l
Green: Power is on
l
Not Illuminated: Power is off
