Administrator: System IP Configuration
You can change the IP address by typing the new IP address and click “Update” to
confirm the new change, and then the message will show “Setting Process OK!!”,
After that, you should reset this switch by power off and then power on it to complete
the new change.
Administrator: System Status
It shows this switch MAC address, and you can select “Back to the last display” or
“Logout” when the time’s out.
Administrator: Load Default Setting to EEPROM
You can click “Load” to load the new factory default setting, and then reset the switch
by power off and then power on to take it effectively.
5
