Installation
This chapter gives step-by-step installation
instructions for the Converter.
Selecting a Site for the Equipment
As with any electric device, you should place the
equipment where it will not be subjected to
extreme temperatures, humidity, or
electromagnetic interference. Specifically, the site
you select should meet the following
requirements:
1.
The ambient temperature should be
between 32 and 104 degrees Fahrenheit (0
to 40 degrees Celsius).
2.
The relative humidity should be less than
90 percent, non-condensing.
3.
Surrounding electrical devices should not
exceed the electromagnetic field (RFC)
standards for IEC 801-3, Level 2 (3V/M)
field strength.
4.
Make sure that the equipment receives
adequate ventilation. Do not block the
ventilation holes on each side of the switch
or the fan exhaust port on the side or rear
of the equipment.
5.
The power outlet should be within 1.8
meters of the switch.
5
