Switch 1 : On -> Forced Mode
Off -> Auto Negotiation mode
Switch 2 : On -> LLR enable
Off -> LLR disable
1 2
o n
12
on
Switch
There is a two pin DIP switch on the module which
define as switch 1 and switch 2:
Switch 1: Fiber mode switch
When the switch was turned to “On”, it means that
the fiber was turned to forced mode, and “Off” for
auto-negotiation mode.
Note:
Be sure the opposite end is using the same setting (forced or Auto-negotiation). And
when using two converters at the same time, the two converters MUST set to forced
mode.
Switch 2: LLR
When the switch was turned to “On”, it means that
the LLR was enabled and “Off” for disabled.
Note:
When using two converters, don’t enable the both device’s LLR function at the
same time.
10
