
Operating The Chair
Step 4:Remove the two small screws from the terminal on the front of chair.
Plug legresr cables into the connrctlon terminal. Put serews back in and
tighten
.
Step 4:Install Armrest massage
Line up the armrest massage with termlnal on the chair and geutly push
connectors together complete connection by firmly tightening the armrest
retaining bolt by hand..
Step 5:Install the remote control stand
Remove plastic cover from the armrest. carefully remove the two screws
inside the panel. Be careful not todropthese in the chair, ltolding the
armrest in place screw the screws back into the chair one at a time ,when
finished, put the plastic cover back into place.
Armrest massage
Armrest retaining bolf
legest cables
serews
Note: Drewings are upside down
Note: Switch step 3 &
step 3.5
Connection terminal on the
font of chair frame
Summary of Contents for R700
Page 1: ......