background image

10

If the 

 key is pressed during a programme,  

P0

 appears on the display and all 

the lamps in the steam bath are switched off.

The duration of the programmes  

P1 

and  

P6 

idepends on the timer running 

period programmed. After timer runtime has expired, the program is termina-
ted.
The duration of the programmes  

P2 

to  

P5 

is 15 minutes. If a shorter timer 

running period is programmed, the programme is finished when the timer 
running period expires.
After the programme is finished, the white steam bath lighting goes on.

Colour therapy programmes

 P1

 

Joy programme

The ideal programme for getting to know colour therapy. 

All the lamps light up in different combinations, transitions flow due to the dim-
mer function.

 P2

 

Relax programme

The predominant colours in this programme are red and blue. Both lamps toge-
ther provide a meditative, violet-coloured light, unifying the differences bet-
ween the elements fire and water which are embodied by red and blue. 

The complementary colour of yellow at the end of the programme ensures 
equilibrium, reinforcing the special effectiveness of this programme.

 P3

 

Power programme

The energy colour red dominates in this programme, augmented by yellow. 
Green light moderates the strong activating power of the red light, preventing 
too strong an effect. It may be advisable to abort the programme early if the 
exposure to red light over a longer period feels unpleasant.

 P4

 

Slow-down programme

The relaxation programme mostly uses the soothing colours of blue and green. 
Orange-coloured light is created by the simultaneous use of the red and yellow 
lamps, creating variation and balance.

 P5

 

Happy sun programme

This programme has its special fascination due to the intense use of yellow light. 
The red lamp transforms to orange, toning down the transition to the final phase 
during which the red and blue lamps are activated.

 P6

 

Kids programme

This programme makes full use of all the colour therapy options available: the 

Summary of Contents for Vision 2000





















Reviews: