Reolink 4CH User Manual Download

Page: 5 / 55

Network Video Recorder Features

•

SUPER HD 4.0 Mega pixels Resolution

•

Real-time Recording at 4.0MP

2512*1520 Resolution

•

Simultaneous Playback and Live view on the same screen

•

Selectable area Zoom during Live and Playback display

•

Easy Camera Installation using Power over Ethernet (CAT5) cable

•

24/7 100% Duty Cycle Hard Disc Drive

•

Expandable High Capacity Storage - up to 3TB

•

Mirror Hard Drive Recording - secure your recordings by backing up footage to an

internal hard drive at the same time as recording to the primary hard drive

•

HDMI output resolution 1080P & VGA output for simple connection to HDTVs (HDMI

cable included)

•

View, Record, Playback, Backup & Remotely control the system simultaneously

Connectivity Features

•

Latest Reolink p2p technology

•

Instant Mobile Viewing on compatible Smartphones Dedicated iPad® and Android tablet

apps with multi-channel live viewing and playback

•

ReoLink Easy Connect Internet Set-up Wizard

•

Reolink Client Software

•

PC (Windows 7

，

8 ) compatible using client software (included) & web browser.

• Mac remote client software (included) and Safari web browser.

• Instant e-mail alerts with snap shot attachments of event and web link

FEATURES

Summary of Contents for 4CH
























































Search results

Summary of Contents for 4CH

Reviews:

Related manuals for 4CH

Brands by name

Popular brands

Reolink 4CH, User Manual

Search results

Summary of Contents for 4CH

Reviews:

Related manuals for 4CH

Brands by name

Popular brands