© RENU Electronics Pvt. Ltd.
Page
19
of
22
1. Erase all URLs and IP addresses stored in the Web Application
2. Erase the static IP if it was provided.
3. Reset the brightness to maximum.
4.
Reset the password back to the factory password of ‘
1234
’.
After the above functions are performed, the device restarts with factory settings loaded.
Copyrights
The copyrights button on the right corner of the device information page displays the Open source licenses used in the
product.
Update
The Update screen can be opened by clicking on the last tab on the left. On this page the user can update the
browser or firmware.
1. To update the browser/firmware, insert a USB flash drive containing the updated version.
2.
Click on ‘Update Browser’ or ‘Update Firmware’
[Note:
The Web HMI uses a Chromium based browser.]
ATTENTION
ATTENTION: Make of USB Flash drive
▪
This device has been tested to work with Strontium® make USB flash drive.
