130
Endura
®
Delta
en
• Place the filters back in the
same position they were in
before they were removed
from the unit.
• Close the filters using the
filter caps. Make sure that
the filter caps are put back
into the correct position to
ensure the airtightness of
the unit.
➃
➄
Restart the unit by turning the power back on. Carry out a “filter reset” on the controls
(TouchDisplay/App/XVK 4-position switch).
12.2 • Cleaning/replacing filters
Make sure that the unit is turned off and unplugged before removing the filters!
➀
➁
• Open the door and
remove the filter caps.
• Before removing the filters
from the openings, be sure
to clearly mark which filter
was on top and which
filter was on bottom, and
in which direction they are
placed, so that it is easy to
return them to the correct
position after cleaning.
➂
• Clean the filters using a
vacuum. If you regularly
vacuum the filters, the
filters could show signs
of wear and tear. In this
case, replace the filter
in order to continue to
guarantee the correct
operation of the system.
Note:
– If you use 2 G4 filters,
mark their positions and
direction, and return them
to the correct position
after cleaning.
– If you combine an F7
and G4 filter, then you
must always place the F7
filter underneath and the
G4 filter on top! Mark
the positions in which
they were placed and
return them to the correct
position after cleaning.
Summary of Contents for Endura Delta 330
