39
Communication
Communication
The REGO 12V 60A MPPT Solar Charge Controller can communicate with other REGO
devices and monitoring devices, enabling safe operation, smart control, remote monitoring, and
programmable settings.
Inter-Device Communication
Depending on the installation condition, the RV-C communication connections between the
charge controller and other REGO devices can be established with backbone or daisy chain
topology. The inter-device communication allows the charge controller to dynamically adjust the
charging profile for an optimal and safe charge.
Backbone Topology
The backbone topology applies to RVs that are integrated with RV-C buses with built-in 120
Ω
resistors on both ends. Check the RV user manual for details or contact the RV manufacturer if
necessary.
For technical support from Renogy, please contact us through
.
INFO
z
Connect devices to the charge controller according to the wiring diagram provided by the RV
manufacturer.
Choose proper communication cables according to your specific demands.
Recommended Accessories
LP16 Plug (7-Pin) to Bare
Drop Cables
Drop Plugs
Split Joint Pliers
NOTE
z
The drop cable shall not exceed 19.6 feet (6 m), and the RV-C bus shall not exceed 98.4
feet (30 m).
z
Different drop sockets are used on the RV-C bus by different RV manufacturers. Select the
Drop Plugs that match the drop sockets for the inter-device communication connections. If
you are not sure about the Drop Plug selection, check with the RV manufacturer. This user
manual takes the Mini-Clamp II plug (4-pin) as an example.
z
Different Drop Plugs follow different pinouts. Crimp the Drop Plugs on the Drop Cables
following the correct pinout. If you are not sure about the Drop Plug pinout, check with the
RV manufacturer. This user manual takes the pinout of the Mini-Clamp II plug (4-pin) as an
example.
Inter-Device Communication
Monitoring Device Communication
