“RS” style door pull straps
FX 802-893-7311
PH 802.893.7366
Order Online: WWW.RENNLINE.COM
READ BEFORE INSTALLATION
The use of any Rennline product is the sole responsibility of the end user. Rennline Inc. accepts no responsibility for
warranty voids or damage resulting from the use of these products. Due to the varying location of wiring harnesses and
other components, carefully inspect any area prior to drilling. All Rennline products are intended for off road use only and
should be installed by a qualified automotive technician.
Check to make sure you have all parts listed prior to installation. If anything is missing contact us immediately.
(2) Handle brackets
(2) 00 Grommets MC86625K31
(2) 8-32 x 5/16” SS Button Head Screw MC92949A191
(2) Handle Straps 4.25”
(2) Handle cover plates
Mini - R55, R56, R57
Step 1: Put window in the down position. Using a screw driver with
tape wrapped around the tip, carefully pry off, (1) armrest, (2) handle
surround (remove small plug at bottom) and the (3) main door card.
See photo for locations. Don’t be afraid, they do all just pull off.
1
2
3
Step 2: Your door should now look like this.
Step 3: Release the rubber boot on the front of door.
Step 4: Remove the (11) torx head screws located all the way around
the door component housing. We have circled 2 of these for you in
the photo above.
Remove plug
For an installation video of this product, go to www.rennline.com and search for P/N DH24, then click the video link.
P/N DH24
