4
Step 1
Remove the Loudspeaker Brackets from the Swivel Adapter and at-
tach the wall mounting plate to the wall using at least three holes in
the plate and the appropriate mounting hardware for the wall type.
If in doubt of the correct mounting hardware, consult a
hardware specialist.
Optional: It may be necessary to remove the Swivel Adapter from
the Wall Plate to access the mounting hardware.
Step 2 (0ptional)
Re-attach the Swivel Adapter to the Wall Plate using the bolts and
washers, if removed in Step 1. Adjust to the desired angle and
tighten. This can be adjusted between 90 and 33 degrees to the
wall.
Step 3
Attach the Loudspeaker Plate to the appropriate mounting holes on
the rear of the loudspeaker using the bolts already present on the
loudspeaker.
Step 4
With the Bottom Hinge Bolt installed in the bottom hole of the
Loudspeaker Plate, set the bolt into the Bottom Hinge Slot of the
Swivel Adapter.
Step 5
Install the two Retaining Slot bolts through the top hole of the
Swivel Adapter and top slot of the Loudspeaker Adapter. Adjust to
the desired angle and tighten. Tighten the Bottom Hinge Bolt.
Loudspeaker
