Inserting batteries, changing batteries
• Open the battery compartment at the rear of the presenter and insert two type AAA/Micro batteries
with the correct polarity (please note: plus/+ and minus/-).
On initial start-up of the presenter remove the small USB receiver which is located in a com-
partment under the battery compartment cover.
Reclose the battery compartment.
• It is recommended changing the battery when the wireless range is greatly reduced if the computer no
longer reacts to the control commands of the presenter.
Removing/storing the USB receiver
The USB receiver is located in a compartment under the battery compartment cover. Open the battery
compartment cover and remove the USB receiver. Reclose the battery compartment.
When transporting or storing the presenter reinsert the USB receiver into the presenter so that the small
USB receiver is not lost.
Operation
• Start the operating system (e.g. at least Windows 2000/XP or later).
• Connect the USB receiver to the computer. The operating system recognizes the new hardware (USB
keyboard and USB mouse) and installs the necessary driver (included in the operating system).
• The product is ready for operation on concluding the driver installation.
Operation
• The presenter is activated on pressing any key. The presenter automatically switches itself off after ap-
proximately 3 minutes of not being used to save power. The blue LED on the presenter goes out. Simply
press any key to reactivate.
If the receiver is out of range (of if the PC is shut down), the blue LED flashes on the presenter.
After a while the presenter switches itself off to save power. The LED goes out.
• The rippled surface at the upper end of the presenter serves as a touchpad, similar to a notebook. The
left/right mouse button is identified with an image.
• The other control keys correspond with those on a conventional multimedia keyboard (e.g. set volume
or play/pause, switch PC on/off, home function for browser and displaying the menu functions of the
operating system).
The control pad conforms with the cursor keys of a conventional keyboard, the “OK” key is covered by
the function of the Enter Key.
The “PgUp” and “PgDn” keys control the page up/page down keys of the normal PC keyboard, for
instance when displaying pages of a presentation software.
Maintenance and cleaning
Apart from the occasional battery change the product is maintenance free. There are no components
inside the product which need to be maintained by you.
To clean the product, a dry, soft and clean cloth is sufficient. Touching the housing too hard (special trans-
parent cover and touchpad) can cause scuffs.
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause
damage to the housing and malfunctioning.
Disposal
a) General
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and dispose of them separately from the
product.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable
batteries. Disposing of them in the household waste is prohibited.
Contaminated batteries/rechargeable batteries are labeled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals involved
are: Cd = Cadmium, Hg = Mercury, Pb = Lead.
Used (rechargeable) batteries can be returned to collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Declaration of Conformity (DOC)
We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this product con-
forms to the fundamental requirements and the other relevant regulations of the directive 1999/5/EC.
The conformity declaration about this product can be found at www.conrad.com.
Technical data
a) Presenter
Power supply ..................................................... 2 batteries of type AAA/Micro
Transmission frequency .................................. 2.4 GHz
Range .................................................................. up to approx. 10 m
Measurements .................................................. 132 x 40 x 22 mm (L x B x H)
b) USB Receiver
Power supply .................................................... via USB
Connection ......................................................... USB2.0
G
Operating Instructions
Presenter with Touch “ZW-52007”
Item no. 1217367
Intended use
The product controls a computer by wireless The model is ideal for controlling presentation or multimedia
programs.
Also other programs or the user interface of an operating system can be controlled by means of an inte-
grated touchpad and two mouse buttons.
The small USB receiver can be inserted into the presenter operating unit for transportation so it is not lost.
The presenter is powered by batteries.
It is imperative that you follow the safety instructions and all other information contained in this user
manual.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Presenter
• USB receiver (is inserted into the presenter on delivery . Open the battery compartment lid to remove)
• Operating instructions
Description of symbols
This symbol informs you about specific risks when handling, operating or using the product.
The “arrow” symbol indicates special remarks and notes for operation.
Safety instructions
In case of damage caused by non-observance of these operating instructions, the warranty
gets void! We are not liable for any consequential damage!
We are not liable for property damage or injuries caused by improper use or non-observance
of safety instructions! Such circumstances will void the warranty!
• Due to safety and approval concerns (CE) the product must not be modified and/or altered
without authorization.
• The product should only be operated in dry, closed interior spaces. It should not be exposed
to damp or wet.
• This product is not a toy, keep it out of the reach of children.
• Operation in areas with high level of dust, flammable gases, vapors or solvents is not autho-
rized. There is a danger of fire and explosion!
• Do not leave packaging material unattended, as children could use it as a toy creating
hazardous situations.
• Treat the product with care. Damage can be caused by impacts, blows or dropping from a
low height.
Battery / rechargeable battery information
• Keep (rechargeable) batteries out of the reach of children.
• Do not leave batteries lying around. There is a risk that children or pets swallow batteries. If a battery
has been swallowed, seek medical advice immediately.
• Leaking or damaged (rechargeable) batteries can cause burns when in contact with skin. You should
thus wear suitable gloves in such a case.
• Chemicals running out of batteries/rechargeable batteries are very aggressive. Objects or surfaces
which can come into contact with it can sometimes be extensively damaged. Therefore keep batteries/
rechargeable batteries in a suitable place.
• Do not short-circuit and disassemble batteries. Do not throw into fire. There is a risk of explosion!
• Do not recharge common batteries that are not rechargeable. There is a risk of explosion! Only use batter-
ies exclusively provided for this. Use a suitable charger.
• Do not mix batteries or rechargeable batteries . Either use batteries or rechargeable batteries.
• Do not mix any batteries or rechargeable batteries in a different condition (e.g. full or half full batteries
or rechargeable batteries).
• Always replace the whole set of batteries/rechargeable batteries.
• Please note the correct polarity (plus/+ and Minus/-) when inserting the batteries/rechargeable batteries.
• If you want to use rechargeable batteries please ensure that the reduced output voltage (batteries 1.5
V, rechargeable batteries - 1.2 V) do not lead to a reduction of the operating time and a reduction in LED
brightness.
Therefore we recommend you only use high quality alkaline batteries for operating the presenter to
ensure long and fault free operation.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
V1_0814_02/VTP
