2
Operating Instructions
RF-VDA-310 USB 3.0 to HDMI/DVI/VGA External
Graphic Card
Item no: 2377801
1 Intended use
The product is an external graphic card for your PC. The product is intended for connecting one additional
monitor via HDMI, DVI or VGA connection. The product connects to a USB3.0 port on the PC.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
2 Delivery contents
■
Product
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code shown. Fol-
low the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important informa-
tion in this document. Always read this information carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
5.2 Handling
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
■
Consult an expert when in doubt about the operation, safety or connection of the appliance.
5.3 Operating environment
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
■
Do not switch the product on after it has been taken from a cold to a warm environment. The con-
densation that forms might destroy the product. Allow the product to reach room temperature before
you use it.
5.4 Connected devices
■
Also observe the safety and operating instructions of any other devices which are connected to the
product.
6 Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
7 Product overview
2
3
4
5
6
1
1
Power indicator
2
VGA port
3
3.5 mm TRS stereo jack
4
HDMI port
5
USB3.2 Type-A plug
6
DVI port
8 Operation
After installing the driver software, connect an external display. Extend or mirror the primary display by
adjusting the PC display settings.
P
RECONDITIONS
:
a
The PC has booted.
1. Connect the USB3.2 plug to a USB3.0 port (or higher) on the PC.
à
The power indicator lights up.
à
The software installer directory shows.
2. From the software installer directory, double-click the installer file that matches your operating system
to start the installation process.
3. After the installation is completed, restart the PC.
4. When the PC is restarted, connect an external display to the port
HDMI
,
DVI
or
AVG
on the product.
Use suitable cables.
5. Switch the external display on.
à
The external display shows an extended or mirrored image of the primary display.
6. (Optional) For audio output, connect a headset with a 3.5 mm stereo jack plug to the 3.5 mm stereo
jack.
Important:
only connect 3.5 mm TRS jack plugs.
7. On the PC, use the display settings menu to extend or mirror the primary display.
9 Cleaning and care
NOTICE! Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
10 Technical data
Host interface ........................................
min. USB3.0
Power supply ........................................
5 V/DC, min. 500 mA via USB
Current consumption ............................
max. 500 mA
System requirements ............................
Windows® 7 and above
MacOS Sierra 10.12 and above
Cable length .........................................
190 mm
Video resolution ....................................
HDMI: max. 1920 x 1080p / 60 Hz
DVI: max. 1920 x 1080p / 60 Hz
VGA: max. 1920 x 1080p / 60 Hz
Audio jack .............................................
3.5 mm TRS stereo jack
Operating temperature .........................
-10 to +50 °C
Operating humidity ...............................
10 – 80 % RH
Storage temperature .............................
-10 to +50 °C
Storage humidity ...................................
10 - 95 % RH
Dimensions (L x W x H) (approx.) ........
92 x 48 x 15 mm
Weight (approx.) ...................................
60 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2377801_V1_0821_jh_mh_en
