Connection
USB lights
• Connect the USB-A plug to a suitable USB power supply such as a USB port on your computer.
• The headset and/or microphone will function normally if you do not connect the USB lights.
Headset and microphone
• Connect the headset jack (green) to the 3.5 mm audio output.
• Connect the microphone jack (red) to the 3.5 mm microphone input.
Splitter adaptor
• Connect the headset jack (green) to the 3.5 mm input on the splitter with the logo.
• Connect the microphone jack (red) to the 3.5 mm input on the splitter with the logo.
Troubleshooting
Problem
Suggestion
No sound to
headset.
• Check the volume on the headset.
• Check the volume on the playback device.
• Check if mute is enabled in the software you are using.
Microphone does
not work.
• Adjust the microphone volume level in the software you are using.
• Check if microphone mute is enabled in the software you are using.
Care and cleaning
• Disconnect the product before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines. You thus fulfill your statutory obligations and contribute to the protection of the envi
-
ronment.
Technical data
a) General
Connection ................................... USB-A (LED lights)
3.5 mm microphone jack
3.5 mm audio jack
Cable length ................................. approx. 2 m
Splitter cable ................................. 1x 3.5 mm 4-pole TRRS male to 2x 3-pole female
CTIA standard
Operating/Storage conditions ....... -10 to +45 ºC, 40 – 85 % RH (non-condensing)
Dimensions (W x H x D) ............... approx. 185 x 240 x 100 mm
Weight .......................................... approx. 305 g
b) Headset
Sound pressure level .................... max. 119 dB
Frequency range .......................... 20 – 20000 Hz
Sensitivity ..................................... 110 dB ±3 dB
Impedance ....................................
16 Ω ±15%
Driver unit Ø ................................. 50 mm
Adjustable volume ........................ yes
c) Microphone
Frequency range .......................... 50 – 12000 Hz
Sensitivity ..................................... -38 dB ±3 dB
Directional characteristic .............. omnidirectional
On/off ............................................ no
Operating Instructions
RF-GH-200 Gaming Headset
Item No. 2274522
Intended use
The product is a headset with microphone and deco-
rative LED ring lights. The volume can be adjusted
using a dial.
A cable adapter is included for use with devices such
as PS4, Xbox One, mobile phones, and laptops.
Contact with moisture must be avoided under all
circumstances.
For safety and approval purposes, you must not re-
build and/or modify this product. If you use the prod-
uct for purposes other than those described above,
the product may be damaged. In addition, improper
use can result in or other hazards. Read the instruc-
tions carefully and store them in a safe place. Make
this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery content
• Headset
• 3.5 mm splitter
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in
the triangle is used to indicate important
information in these operating instruc-
tions. Always read this information care-
fully.
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of
children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme tempera-
tures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts, im-
pacts or a fall even from a low height can damage
the product.
• Consult an expert when in doubt about the opera-
tion, safety or connection of the appliance.
•
Maintenance, modifications and repairs must only
be completed by a technician or an authorised re-
pair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our tech-
nical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instruc-
tions of any other devices which are connected
to the product.
Operating elements
3
4
5
6
1
2
1 Microphone cover
2 Microphone
3 Adjustable band
4 LED light
5 Volume adjust
6 Connection:
USB-A: LED lights
3.5 mm microphone jack (red)
3.5 mm headset jack (green)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2274522_v1_0920_02_dh_m_en_1