Operation
a) Connection
Insert a SD/SDHC/SDXC/MMC card in the slot of the card reader (observe the correct
orientation, do not use force!) and plug the card reader into a free USB port on your computer.
All the drivers are already included in Windows
®
(minimum requirement Windows
®
XP).
Windows
®
automatically allocates an additional drive letter. The LED on the card reader flashes
when a memory card is inserted, or blinks during read/write access.
b) Disconnecting the Card Reader
When reading/writing to memory cards is underway, wait until they are finished (LED does not
blink). Then disconnect the card reader with the memory card from the USB port.
If the memory card is removed during a read/write access, the data on the memory
card can be damaged. It is possible that the memory card will have to be reformatted
afterwards.
c) Reading/Writing to Memory Cards
The memory card is integrated into the system in same way as a conventional removable
media drive. With Windows
®
file manager you can now read the data on the memory card (or
store data on the memory card), in the same way as you use the hard disk or a USB stick. Make
sure that the write protection is deactivated when writing to the SD/SDHC/SDXC/MMC card.
Care and Cleaning
• Disconnect the product from the mains and connected devices before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
• Do not immerse the product in water.
Disposal
Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Operating Instructions
SDXC Card Reader USB 2.0
Item No. 2203083
Intended Use
The product can be connected to a USB port of a computer. It is designed to read and write to
appropriate memory cards.
It is intended for indoor use only. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can result in short circuits or other hazards. Read the instructions
carefully and store them in a safe place. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Card Reader
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
-
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
•
Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2203083_V2_0620_02_mxs_m_en
