This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
*1577042_v4_1017_02_DS_m_4L_(1)
d)
Playing audio files from a microSD card
• Insert a compatible microSD card (up to 64 GB) into the SD card slot (3). The card contacts should point
towards the micro USB port (2). To remove the microSD card, press it lightly with your fingernail to release
it from the slot.
• Press the on/off button
(9) repeatedly until microSD card mode is enabled. Each mode is indicated
by a notification tone. There are two modes: Bluetooth
®
mode and microSD card.
• Playback will start automatically when microSD card mode is enabled and the microSD card contains
compatible files (MP3).
• Press the
+
button (8) to skip to the next track in the playlist.
• Press the multifunction button
(7) to pause playback.
• Press the multifunction button
(7) again to resume playback,
• Press the
-
button (6) to skip to the previous track in the playlist.
e) Answering/ending/declining phone calls
• When the speaker is paired with a mobile phone and you receive an incoming call, the current track will be
paused and the speaker will play a ringtone.
• Press the multifunction button
(7) to answer the incoming call, or hold down the multifunction button
for 3 seconds to decline the call. For best results, speak in the direction of the microphone (1).
• Press the multifunction button
(7) to end a call.
• To redial the previous number, press the multifunction button
(7) twice in quick succession. Press the
multifunction button once to stop dialling the number.
• You can also use the onscreen controls on your mobile phone to answer/end a call.
f) Wired audio playback
• If your audio device does not support Bluetooth
®
, you can connect it to the speaker using the 3.5 mm
AUX cable.
• Connect the 3.5 mm analogue input (4) to the audio output on your audio device. The speaker will play
a notification tone and the LED indicator (5) will flash slowly to indicate that auxiliary mode is enabled.
• Start playback on your audio device.
•
Use the controls on your audio device to control playback and adjust the volume.
• The Bluetooth
®
connection is automatically terminated when the 3.5 mm jack plug is inserted into the
speaker
g) Acoustic messages
Message
Meaning
Power on
Switching on
Power off
Switching off
Connected
Connected via Bluetooth
Disconnected
Disconnected from Bluetooth
Bluetooth mode
Bluetooth
®
mode
TF card mode
microSD card mode
Aux-In mode
Cable mode (analogue)
Maximum volume
Max. volume
Minimum volume
Min. Volume
h) Buttons
Button
Function
Volume -
This button (6) skips to the previous track in the playlist. Press and hold to
decrease the volume.
Multifunction button
(7)
Press to pause/resume playback.
Press to answer or end a call.
Press and hold for 3 seconds to decline an incoming call.
This button (8) skips to the next track in the playlist. Press and hold to
increase the volume.
On/off button
(9)
Press and hold for 3 seconds to turn the speaker on.
Press and hold for 3 seconds to turn the speaker off.
Choose operation mode.
i) Troubleshooting
• If some features do not work properly, ensure that all of the necessary Bluetooth
®
drivers are installed
and up-to-date.
• Please note that some audio devices (e.g. smartphones) may not support the remote-controlled features
on the speaker. Check the list of features for your device (the AVRCP protocol must be supported) and
visit the website of your smartphone manufacturer. Updating your device may help to resolve the issue.
• If there is no sound, try increasing the volume. If the issue persists, re-establish the Bluetooth
®
connection
or pair the devices again.
• If the sound is distorted, ensure that the audio device and speaker are within 10 m of each other and check
that there are no sources of interference.
j) Care and cleaning
• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the
casing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
• Do not clean the product by immersing it in water.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this product
conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol, and then enter the product order number in the
search box. The EU Declaration of Conformity is available for download in PDF format.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste. Always
dispose of the product according to the relevant statutory regulations.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Input voltage/current ............................. 5 V/DC, 0.5 A
Rechargeable battery ........................... 3.7 V/DC, 600 mAh (installed Lithium-ion battery)
Output power
........................................ 3 W (RMS)
Bluetooth
®
version ................................ 4.1
Bluetooth
®
profile
.................................. HSP V1.2 HFP V1.5 A2DP V1.2 AVRCP
Range ................................................... Approx. 10 m
Frequency range (acoustic) .................. 160–18,000 Hz
Frequency range (electromagnetic) ...... 2.4 GHz to 2.48 GHz
Signal-to-noise ratio ..............................
≥75 dB
Connections ..........................................
3.5 mm jack, microSD card (not included)
Charging time ....................................... 1.5 to 2 hours
Battery life ............................................. Approx. 4 hours
Transmission power.............................. 100 mW
Sensitivity .............................................
≥90 dB
Distortion .............................................. 10 %
Speaker ................................................ 40 mm
Impedance ...........................................
4 Ω
Supported operating systems ............... Windows
®
2000, XP (Home, Pro, with SP1, SP2, SP3) (32-bit),
10 (32/64-bit), Mac OS 10.7 to 10.10, Linux 5.0 to 6.0, Android 3.0
to 7.0, iOS 4, iOS 10.3.1, Blackberry 9530
Operating conditions
............................. 0 to +40 °C, 0–85 % relative humidity (non-condensing)
Storage conditions ................................ -30 to +60 °C, 0–90 % relative humidity (non-condensing)
Dimensions (W x H x D) ....................... 75 x 40 x 41 mm
Weight .................................................. 234 g
