c)
Connecting the mouse
• Turn the mouse on and enable Bluetooth on your computer. The distance from the mouse to your computer
must not exceed 10 m.
• Hold down the right mouse button and the scroll wheel button for approximately 6 seconds. The LED
indicator in the scroll wheel will flash. In your computer's Bluetooth menu, select
'Bluetooth Mouse'
(or similar) and connect it to your computer. The connection instructions may vary depending on your
operating system. If you are not sure how to connect the mouse, refer to the instructions for your operating
system.
d)
Configuring the mouse settings
• Switch on the mouse.
•
Open the mouse configuration menu on your operating system and configure the desired settings.
• The sensitivity can be changed by pressing the
DPI
button. The available settings are 800 dpi, 1200 dpi,
and 1600 dpi. The LED indicator in the scroll wheel indicates the chosen sensitivity setting. 800 dpi
(flashes once) – 1200 dpi (flashes twice) – 1600 (flashes three times).
e) Surfaces
•
Place the mouse on a smooth, flat surface of a sufficient size. The mouse's optical motion sensor does
not work on all surfaces.
•
No movement will be detected when the mouse is used on reflective surfaces or glass. If the cursor does
not move, try placing the mouse on a suitable mouse pad. Please note that the mouse may leave marks
on delicate surfaces.
Care and cleaning
• Turn off the product before cleaning.
• Do not immerse the product in water.
•
If the cursor doesn't move properly after you have used the mouse for a long period of time, check whether
the sensor on the bottom of the mouse is dirty.
If so, blow briefly on the sensor or clean it with a soft, clean brush.
• Use a dry, lint-free cloth to clean the product.
• Do not use any abrasive or chemical cleaning agents.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product
conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol and enter the product order number in the search
box. You can then download the EU declaration of conformity in PDF format.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
Remove any inserted (rechargeable) batteries and dispose of them separately from the product.
b)
(Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries. Disposing of them in the household waste is prohibited.
Batteries containing hazardous substances are labelled with this symbol to indicate that
disposal in domestic waste is forbidden. The designations for the heavy metals involved are:
Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the
trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our stores or wherever
(rechargeable) batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply ........................................ 1 x 1.5 V AA battery
Battery life with new battery .................. Approx. 160 h
Sensitivity settings ................................ 800 / 1200 / 1600 dpi
Motion detector ..................................... Optical sensor
Current consumption ............................ Operation: 22 mA
Standby: 5 – 8 mA
Sleep: 150 µA
Wireless range ......................................
≤
10 m
Transmitting frequency .........................
2.4 – 2.48 GHz
Transmission power.............................. 0 dBm, 1 mW
System requirements ............................ (depending on Bluetooth hardware)
Windows
®
XP (with SP1, SP2, SP3) (32-bit),
Vista (32/64-bit), 7 (32/64-bit), 8 (32/64-bit),
8.1 (32/64-bit), 10 (32/64-bit), RT;
Mac OSX 10.4 or later; Linux 2.4 or later; Android 4.4 or later;
Operating conditions ............................. -10 to +50 °C, 10 – 85 % RH (non-condensing)
Storage conditions ................................ -20 to +60 °C, 10 – 95 % RH (non-condensing)
Dimensions (W x H x D) ....................... 60 x 38 x 96 mm
Weight .................................................. 76 g
Operating instructions
Bluetooth mouse B1401E
Item no. 1492918
Intended use
This mouse is designed to operate your computer via a Bluetooth connection. It features a DPI button, which
enables you to change the sensitivity settings with ease.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for
purposes other than those described above, the product may be damaged.
Read the instructions carefully and keep them. Make this product available to third parties only together with
its operating instructions.
This product complies with the statutory national and European requirements. All company names and product
names are trademarks of their respective owners. All rights reserved.
Delivery content
• Mouse
• AA battery
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code above.
Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in the triangle is used to highlight important information
in these operating instructions. Always read this information carefully.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a)
General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Consult an expert when in doubt about the operation, safety or connection of the device.
•
Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
b) Batteries
• Correct polarity must be observed while inserting the battery.
• The battery should be removed from the device if it is not used for a long period of time to
avoid damage through leaking. Leaking or damaged batteries might cause acid burns when
in contact with skin, therefore use suitable protective gloves to handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave batteries lying around, as there
is a risk that children or pets may swallow them.
•
Batteries must not be dismantled, short-circuited or thrown into fire. Never recharge non-
rechargeable batteries. There is a risk of explosion!
Operation
a) Battery
• Remove the battery compartment cover on the bottom of the product.
• Insert one AA battery into the battery compartment, paying attention to the polarity markings.
• Replace the battery compartment cover.
When the battery is empty, the LED indicator in the scroll wheel will flash.
b) Turning the mouse on/off
• To turn the mouse on, slide the on/off switch on the bottom to the
ON
position.
•
When you have finished using the mouse, turn it off by moving the switch to the
OFF
position.
The mouse will switch to sleep/standby mode after 10 minutes/15 seconds of inactivity. To wake
the mouse, press any button.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*1492918_v2_0220_02_jc_m_4L
