background image

Overview

1

2

•  USB-C™ connector

•  RJ45 socket

Connection

•  Connect the network adapter to a USB-C™ port on a computer. You may need to wait a few 

moments while your computer installs the required drivers.

•  Windows

®

 XP and 7 (32/64 bit) users should download and install the driver “Gaming Family 

Controller” from: www.realtek.com/en → Downloads → Communications Network ICs → 

“Realtek USB FE / GbE / 2.5GbE / Gaming Family Controller Software Quick Download 

Link”.

•  The Link/Act LED for the RJ45 port lights during an active network connection and flashes 

during data transfer.

•  The power LED is lit when the network adaptor is supplied with power.

Care and cleaning

•  Disconnect the product and allow to cool down before each cleaning.
•  Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as 

they can cause damage to the housing and malfunctioning.

•  Clean the product with a dry, fibre-free cloth.

Disposal

  Electronic devices are recyclable waste and must not be disposed of in the house-

hold waste. At the end of its service life, dispose of the product in accordance with 

applicable regulatory guidelines.

 

You thus fulfill your statutory obligations and contribute to the protection of the envi-

ronment.

Technical data

a) 

USB-C™

Connection ................................... USB-C™ 3.2 Gen 1 (backwards compatible)
Bus powered ................................. yes (no external power needed)

b) Ethernet 

Connection ................................... 50 m on RJ45 Cat. 6a
Transfer rate ................................. 10/100/1000/2500 Mbps
TCP .............................................. Large Send Offload (LSO) v1/v2 
IEEE .............................................  802.1p Quality of Service (QoS) Layer 2 priority Encoding/

Decoding 

IEEE ............................................. 802.1Q VLAN tagging
Support .........................................  10 Base-T, 100 Base-TX, 1000 Base-T, 2.5G Base-T with 

auto-negotiation 

automatic polarity detection, crossover detection 

c) General

LED indicators ..............................  Power:  yellow 

Link/Act: green

Heat dissipation ............................ passive (aluminium housing with fins)
Supported OS* .............................  Plug and play: Windows

®

 8 (or above), Mac OS X (or 

above) 

Driver needed: Windows

®

 XP, 7.

Operating conditions .....................  0 to 45 ºC, 10 – 85 % RH (non-condensing)
Storage conditions ........................  -20 to +70 ºC, 10 – 85 % RH (non-condensing)
Dimensions ...................................  Product (L x W x H): 216 x 24 x 14 mm
Weight .......................................... 50 g

 Operating Instructions

USB-C™ Gigabit Ethernet Adapter

Item No. 2299535

Intended use

The  product  is  a  USB-C™  gigabit  Ethernet  adapter  supporting  ethernet  speeds  of  up  to 

2.5 Gbps.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided 

under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use 

the product for purposes other than those described above, the product may be damaged. In 

addition, improper use can result in other hazards. Read the instructions carefully and store 

them in a safe place. Make this product available to third parties only together with its operating 

instructions.
This product complies with the statutory national and European requirements. All company 

names and product names are trademarks of their respective owners. All rights reserved.

Delivery content

•  USB-C™ Gigabit Ethernet Adapter
•  Operating instructions

Up-to-date operating instructions

Download the latest operating instructions at www.conrad.com/downloads or 

scan the QR code shown. Follow the instructions on the website.

Explanation of symbols

  The symbol with the exclamation mark in the triangle is used to indicate important 

information in these operating instructions. Always read this information carefully.

Safety instructions

Read the operating instructions carefully and especially observe the safety 

information. If you do not follow the safety instructions and information on 

proper handling in this manual, we assume no liability for any resulting per

-

sonal injury or damage to property. Such cases will invalidate the warranty/

guarantee.

a) General information

•  The device is not a toy. Keep it out of the reach of children and pets.
•  Do not leave packaging material lying around carelessly. This may become dan-

gerous playing material for children.

•  Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high 

humidity, moisture, flammable gases, steam and solvents.

•  Do not place the product under any mechanical stress.
•  If it is no longer possible to operate the product safely, take it out of operation and 

protect it from any accidental use. Safe operation can no longer be guaranteed 

if the product:

 - is visibly damaged,
 - is no longer working properly,
 - has been stored for extended periods in poor ambient conditions or
 - has been subjected to any serious transport-related stresses.

•  Please handle the product carefully. Jolts, impacts or a fall even from a low height 

can damage the product.

•  Consult an expert when in doubt about the operation, safety or connection of the 

appliance.

•  Maintenance, modifications and repairs must only be completed by a technician 

or an authorised repair centre.

•  If you have questions which remain unanswered by these operating instructions, 

contact our technical support service or other technical personnel.

b) Persons and product

•  Do not cover the product. Always ensure sufficient ventilation as the product may 

heat up considerably during operation.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-

cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data 

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication 

represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE. 

*2299535_v1_0221_02_dh_m_en(1)

Reviews: