Do not use force and avoid touching the
circuit board components when installing
the SSD.
• Place the SSD assembly into the enclosure with the
USB Type-C™ connector facing outward.
• Carefully slide the assembly all the way in.
Attach Metal Cover Plate
• The countersunk holes should be facing outwards.
• The metal cover plate should line up with the cutouts
for the USB Type-C™ port
(1)
and the LED activity
indicator
(2)
.
• Screw the plate into the front of the enclosure using
the provided screws.
Do not overtighten the screws.
Connect to Computer
• Connect the M.2 SSD enclosure to USB host port via USB cable (not included).
• Refer to your computer operating instructions for information about how to format your M.2 SSD module
for use.
Aluminium Cover Sticker
If the enclosure is working fine and you do no need to open it again, you may adhere the aluminuim sticker
to the front pane.
Before fixing the sticker to the front panel,
make sure it is lined up with the hole for
the LED activity indicator
(2)
.
• Remove the adhesive backing and adhere the
sticker as shown.
LED Activity Indicator
The LED activity indicator
(2)
allows you to monitor the M.2 SSD module activity.
Do not remove the enclosure from the host computer while the LED is flashing. This could
damage the drive or the enclosure resulting in data loss. Refer to your computer operating
system instructions on how to properly disconnect an external drive from your computer.
• When the enclosure is powered, the LED will light up.
• While the SSD is being accessed, the LED will blink.
Care and Cleaning
• Disconnect the product before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause
damage to the housing and malfunctioning.
• Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines. You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical Data
USB Interface ....................................... U
SB 3.1 Type-C
TM
max. 3.3 V/DC 3.2 A
Key socket type .................................... M.2 NGFF type 2280-D5-M M
Support ................................................. PCIe Gen3 / NVMe SSD M.2 type 2280 (80 mm), 2260 (60 mm),
2242 (40 mm)
Dual-sided SSD module 1.5 mm component height
USB 2.0 / USB 3.1 Gen1 / Gen2 power saving mode
10 Gbps, 5 Gbps, 480 Mbps, 12 Mbps transaction
Compatibility ......................................... NVM Express 1.3, USB 3.1 Gen 1 and 2
Operating conditions ............................. 0 to 70 °C, 20 – 80 % rH
Storage conditions ................................ -40 to +85 °C, 15 – 90 % rH
Dimensions (L x W x H) ........................ 130 x 34.5 x 10.5 mm
Weight .................................................. 55 g
Operating Instructions
M.2 Hard Drive Enclosure USB-C
TM
Item No. 1887255
Intended Use
This M.2 NVMe SSD enclosure with USB Type-C™ port is a portable data storage solution for your computer.
You can use your M.2 SSD module as a high-speed storage device over a USB 3.1 Gen 2 connection, with
throughput speeds of up to 10 Gbps.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
result in other hazards. Read the instructions carefully and store them in a safe place. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Enclosure
• M.2 adapter
• Metal cover plate
• 2x Mounting screws
• Aluminum cover sticker
• Operating Instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate
important information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other products which are connected
to the product.
• Consult an expert when in doubt about the operation, safety or connection of the product.
• Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
• Before connecting an external SSD drive to a USB interface on your computer, check that the
interface can deliver sufficient current to power the SSD. It is possible a USB interface (e.g.
USB 2.0) cannot supply enough current to run an external SSD causing damage or loss of
data. Other factors such as cable type, cable length and number of peripherals connected to
the same USB interface can affect performance. If the USB interface cannot power the SSD,
you may opt to connect it through a USB hub with external power supply.
Overview
1
2
3
4
5
6
1 USB Type-C™ port
2 LED activity indicator
3 M.2 M key socket
4 Type 2242 mount
5 Type 2260 mount
6 Type 2280 mount
Install M.2 SSD Module
A
• Insert a compatible M.2 SSD module into the M.2 M key
socket
(3)
.
• Secure the M.2 SSD to the designated plated hole using the
included mounting screws
(A)
. Type 2280 mount
(4)
, type
2260 mount
(5)
, type 2242 mount
(6)
.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
*1887255_v1_0119_02_dh_m_en(1)
