Installation
When drilling holes in walls or when bolting to walls, ensure that no cables or lines are
damaged.
• The cable box has a black mounting bracket with two mounting holes.
• Take the cable box and hold the mounting holes of the bracket on the desired mounting location.
• Mark the mounting holes with a pencil.
• Drill the mounting holes.
• Attach the cable box to the mounting place using suitable mounting material.
Connection and Getting Started
The specified connected power of 2000 W is possible only if the cable of the cable box is
unwound fully.
If the cable is rolled up, the maximum connected power is 1400 W.
• Connect a consumer load to the mains socket of the cable box.
• Connect the main plug of the cable box to the mains power socket.
The LED of the cable box lights up in red (Power LED).
After activation of the thermal protection, the cable box - after a certain waiting time (= cooling
down time), can be put into operation again by pressing the red button.
Care and cleaning
Make sure the cable box is de-energised during cleaning. For this purpose, remove the main
plug of the cable box from the mains socket.
• This product is maintenance-free.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause
damage to the housing and malfunctioning.
• Clean the product with a dry, fiber-free cloth.
• Make sure the cable box never comes into contact with liquids.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At
the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage ................................. 230 V/AC, 50 Hz
Connected power ................................. max. 2000 W (completely unrolled cable) or
max. 1400 W (completely rolled cable)
Winded cable length ............................. 9 m
Total cable length .................................. 11 m
Child protection ..................................... yes
Cable type ............................................ H05VV-F 3 G 1.5 mm
2
Dimensions (W x H x D) ...................... approx. 210 x 245 x 100 mm
Weight .................................................. approx. 2.8 kg
Operating instructions
Cable box for wall mounting
Item no. 1674559
Intended use
This cable box with thermal fuse is suitable for the connection of a consumer load of up to max. 2000 W.
In addition, the cable box features a cable management with automatic retractor and a mounting bracket
for wall mounting.
Only connect the cable box to a standard mains socket (230 V/AC, 50 Hz, with protective earth conductor)
connected to the public mains.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them.
Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Cable box
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of personal injury,
such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating manual that
absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Only connect the cable box to a standard mains socket (230 V/AC, 50 Hz, with protective earth
conductor) connected to the public mains.
• Do not cascade the cable box. Never connect multiple cable boxes in series.
• Never touch the main plug or the mains plug of the cable box with wet or damp hands, when
trying to connect to the cable box. There is a risk of a lethal electric shock!
• Never pull out a mains plug, that is connected to the cable box, by pulling on the cable. Always
pull the plug from the cable box by gripping the area provided for this purpose on its sides. The
same applies to the main plug of the cable box.
• Do not overload the cable box.
• If the product casing is damaged, do not use the product any more! When it is connected
to the mains, do not touch the cable box or the connected device! First switch off the power
socket into which the cable box is plugged, disconnect all the pins (switch off the automatic
circuit breaker or pull out the fuse. Finally, switch off the associated FI protection switch). You
can then remove the main plug of the cable box from the mains socket. Take the product to a
specialist workshop or dispose of it in an environmentally friendly way.
• Never pour fluids out above electrical devices. There is a danger of fire or of a fatal electric shock.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in
part, is prohibited. This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
*1674559_V1_0518_02_mxs_m_en
