Operating instructions
CR40e-USB-C USB 2.0 card reader, black
Item no. 1407917
Intended use
This product is intended for writing to and reading compatible memory cards via computer with
type C USB port.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short circuiting, fire, electric shock etc. Read
the instructions carefully and keep them for future reference. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements.
All company names and product names are trademarks of their respective owners. All rights
reserved.
Delivery content
• Card reader
• Operating instructions
Up-to-date Operating Instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item number
into the search field. After submitting the query you can download
displayed records.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in theses operating instructions, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it away from children.
• Do not leave packaging material lying around carelessly. These may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Consult a professional if you require assistance with product operation, safety or connection.
• Maintenance work, adjustments and repairs may be carried out only by a professional or at a
specialist workshop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Operating elements
1
S-1
S-3
S-4
S-2
1
2
Operation
• Installation of a driver is not necessary.
• Switch on your computer and wait until the operating system is fully booted.
• Pull the type C USB plug out from the holder.
• Connect the type C USB plug to an empty
type C USB port
on your computer.
USB-C connector with USB 2.0 data transfer rates (max. 480 Mbps)
• Determine the type of your card and then select the proper plug-in slot according to the
markings on the card reader. Insert the memory card(s) into the corresponding slot observing
the correct alignment (see markings on the card reader).
• The card reader or the card could get damaged if the card is improperly aligned and inserted.
• Flip open the
cover opposite to the cable
(see picture) to expose the SD/MMC card slots.
Slightly press the cover on both sides at the respective markings (see picture, step 1) and then
open the cover (see picture, step 2).
• The product can read
up to 2 cards simultaneously
. It is not possible to use card slots
S-1
and
S-4
or card slots
S-2
and
S-3
at the same time.
• The card reader features an indicator light:
Indicator light
Meaning
Flashes
Reading and writing to the card(s)
Lights up steadily
• No card inserted
• Card in standby mode (only MicroSD card)
• Your computer shows a new drive/drives. Follow the operating instructions of your operating
system in order to read or write to this/these card(s).
•
For older operating systems:
Some memory card formats (such as exFAT) might require the
installation of a system patch in order for the card reader to recognize the memory card. Refer to the
operating instructions and the latest update information of your operating system.
• Never disconnect the product or remove the card during data transmission. There is a risk of
loosing or corrupting data.
•
Before removing a memory card, disconnect it from the device first in order to avoid data
loss, data corruption or product damage. Observe the operating instructions of your operating
system.
Compatible memory cards
micro SD
micro SD, micro SDHC, micro SDXC
SD
SD, SDHC, SDXC, EXTREME SD, EXTREME III SD, ULTRA SD, ULTRA II SD,
ULTRA II SD PLUS, SD-ULTRA-X, ULTRA SPEED SD, SD PRO, SD ELITE PRO,
HS SD
MMC
(Only with adapter; adapter not included)
MMC, MMC 4.0, MMC 4.2, HS MMC, HS RS MMC, RS MMC,
RS MMC 4.0, MMC MOBILE, MMC PLUS (with adapter for MINI SD, HS
MINI SD)
Cleaning
• Remove the product from the computer before cleaning.
• Never submerge the product in water.
•
Clean the product with a dry, fiber-free cloth.
• Do not use any abrasive or chemical cleaners.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical data
Power supply .....................................5 V/DC (via USB type C), max. 500 mA
Transfer rate ......................................
max. 480 Mbps
System requirements ....................... Windows
®
7 (32/64 bit); 8 (32/64 bit);
8.1 (32/64 bit); 10 (32/64 bit);
Mac OS X 10.10 or higher
Operating conditions ........................0 to +60 °C, 20 – 80 % RH
Storage conditions............................-20 to +60 °C, 10 – 95 % RH
Dimensions (L x W x H) ....................58 x 34 x 17 mm
Weight .................................................approx. 14 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the
technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
V2_0716_02_JH
