31
3. Intended use
This product is suitable for switching an electrical consumer on and off by
radio signal controlled by temperature. The electrical consumer can be
switched on and off manually as well.
The temperature controller included in the set is operated with two AAA/mi-
cro batteries. The temperature controller can be switched between heating
and cooling mode, so that either a heater or a cooler can be controlled. With
8 different switching programmes that work independently of each other,
switching times for a single day, for all weekdays (Monday - Friday) or for
the entire week (Monday - Sunday) can be specified.
The receiver (radio switching socket) is intended for a consumer with a
maximum power/current consumption or 3500 W/15.2 A (resistive load) resp.
600 W/2.6 A (inductive load). The voltage/current supply of the receiver
takes place via a domestic mains socket (230 V/AC, 50 Hz).
Read the operating instructions precisely and keep them. Only pass the
product on to any third parties together with the operating instructions.
Any use other than that described above can damage the product and may
involve additional risks such as short circuit, fire, electric shock, etc. No part
of this product must be modified or converted! The safety information must
be observed at all times!
This product complies with the statutory national and European require-
ments. All company names and product names are trademarks of their re-
spective owners. All rights reserved.
