Operating instructions
Gooseneck microphone
Item no. 1337794
Intended use
The microphone is intended for converting acoustic signals (sound waves) into electric signals.
The low level audio output signal must only be connected to suitable microphone inputs on audio
devices.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short circuiting, fire, electric shock etc. Read
the instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and European requirements. All company names
and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Microphone
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in this manual, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
• Do not direct the microphone at the speakers. This will cause acoustic feedback that
could damage both the speakers and the microphone.
• In order to avoid distortions or mismatching, which could damage the microphone
or any audio device connected, the product must only be connected to suitable
microphone inputs. Also refer to the connection values under technical data in
regard to this matter.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operation
XLR-3-PIN
Maintenance and cleaning
• This product does not require maintenance. There are no components located inside the product
you need to maintain. Never open/dismantle the product. Have maintenance and repairs done
by qualified experts or repair shops only.
• Disconnect the product from the audio device before cleaning.
• To clean the product, a dry, soft and clean cloth is sufficient. You can use a long-haired, soft and
clean brush and a vacuum cleaner to remove dust.
• Never use any aggressive cleaning agents or chemical solutions as they may cause damage to
the housing or the product to malfunction.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Connection ....................................................XLR
Directivity ......................................................Cardioid
Frequency response ....................................300 – 11000 Hz
Sensitivity ......................................................-54 dB ±3 dB
Impedance ....................................................600 Ω ±30 %
Operating conditions ...................................-20 to +60 ºC, 0 – 70 % RH
Storage conditions.......................................-25 to +70 ºC, 0 – 85 % RH
Dimensions (Ø x L) .......................................32 x 480 mm (total)
9 x 322 mm (gooseneck)
Weight ............................................................188 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
V1_0515_02-ETS-Mkd
