37
8. Set-Up
When selecting the set-up location, please take into consideration the room layout such as the wherea-
bouts of the nearest socket, etc.
When selecting the set-up site, observe that direct sunlight, vibration, dust, heat, cold and
moisture must be avoided. There also must not be any strong transformers in the device’s
proximity.
Ensure sufficient ventilation when setting up the device with other equipment. Keep a suf-
ficient distance from heat sources. Do not place the device directly next to heat sources such
as amplifiers. Do not point any strong spotlights or light sources towards the device. This may
cause overheating (danger of fire!).
Heat dissipation from the device must not be obstructed. Never place the device on any soft
surfaces such as a carpet or a bed. Never cover the device. Air circulation must not be ob-
structed by objects such as magazines, tablecloths, curtains or similar. This prevents heat
dissipation from the device and may lead to overheating (danger of fire!).
Only operate the device on a sturdy surface that is not sensitive to high temperatures.
Make sure you position the device safely. Falling devices pose a significant risk of accident.
Do not drill or screw any additional screws into the casing to mount the device. This may
expose dangerous voltage to touch.
Make sure that the connection cables are not squeezed or damaged by sharp edges. Always
place cables so that no one can trip over them or be caught in them. Danger of injury!
The cables must be sufficiently long. Do not put any mechanic strain on them. This may dam-
age the cables or device. There is a risk of dangerous electric shock.
• Set up the device on a level and stable surface under consideration of the above information.
• When selecting the place if setup, bear in mind that you should be able to easily read the display later.
Due to the diversity of furniture paints and polishes used, it is possible that the device’s feet will
leave visible residue on furniture due to chemical reaction. The device therefore should not be
placed on valuable furniture surfaces without any suitable protection.
Summary of Contents for 1216218
Page 3: ...3...
