58
XM-60 and XM-600 multi-axis calibrator
www.renishaw.com/xm60
Appendix B
Using the 90 degree bracket
The 90 degree bracket can be used in two orientations (standard and
reverse). Reverse orientation allows the launch to be mounted from the
side of the machine tool bed to maximise the length of the axis that can
be measured.
Standard orientation
When using the 90 degree bracket the user must clock the side face of the
bracket to ensure it is parallel to the axis of travel (for example, if measuring
Z on a vertical machining centre, clock one of the faces of the 90 degree
bracket to the X or Y axis of the machine).
Reverse orientation
Clocking the side face of the bracket
