1-5
Safety
Information for the user
In all applications involving the use of machine
tools or CMMs, eye protection is recommended.
Refer to the machine supplier’s operating
instructions.
The TS34 system must be installed by a
competent person, observing relevant safety
precautions. Before starting work, ensure that the
machine tool is in a safe condition with the power
switched OFF and the power supply to the HSI
disconnected.
Information for the machine supplier
It is the machine supplier’s responsibility to ensure
that the user is made aware of any hazards
involved in operation, including those mentioned in
Renishaw product documentation, and to ensure
that adequate guards and safety interlocks are
provided.
Under certain circumstances the probe signal
may falsely indicate a probe seated condition. Do
not rely on probe signals to stop the machines
movement.