2.5
RMP40 basics
Acquisition mode
System set-up is achieved using Trigger Logic and powering-on the RMI or RMI-Q, or applying ReniKey.
Partnering is only required during initial system set-up. Further partnering will be required if the RMP40,
RMI or RMI-Q is changed.
NOTES:
Systems using the RMI-Q can be partnered with up to four RMP40s manually. Alternatively this can be
achieved by using ReniKey; a Renishaw machine macro cycle which does not require the RMI-Q to be
power cycled.
For more information or to download ReniKey free of charge visit:
www.renishaw.com/mtpsupport/renikey
Partnering by ReniKey is not available for RMI.
Partnering will not be lost by reconfiguration of probe settings or when changing batteries, except
where
“multiple probe mode”
is selected. Partnering can take place anywhere within the operating
envelope.
