Installation procedure
NOTE:
The MRS heavy-duty leg kit must be used in conjunction with the standard MRS leg assembly. The legs should be mounted
using the step back adaptor method.
1. Locate the first footplate (item 3) with a suitable threaded stud on the CMM table having consideration for the required position of the MRS
rail that will accommodate all loaded racks within the working volume. Fasten the footplate to the table using the double-ended threaded
stud* (item 2).
2. Locate the second footplate (item 3) at the appropriate distance along the chosen CMM axis and follow step 2 above.
3. Screw the heavy duty leg (item 1) to the top of the threaded stud (item 2) and hand-tighten. Repeat for second leg assembly.
4. Place the first MRS foot (item 7) (part of the standard MRS leg assembly) on top of the heavy duty leg (item 1) and secure using the M10
screw (item 6). Repeat for the second leg assembly.
5. Proceed with the remaining construction of the MRS system as described in the pages detailed:
•
Aligning the MRS feet to the CMM axis
•
Fixing the standard MRS legs to the rail using step back adaptors
.
•
Fixing the standard MRS legs to the MRS foot
* Two sets of double ended threaded studs are provided to suit different CMM table configurations. The thread sizes supplied are M10, M8
and M6. Alternatively, 3/16 " UNC and 5/16 " UNC can be obtained on request from your Renishaw supplier.
MRS installation and user's guide
www.renishaw.com
Issued 12 2021
17
