Renishaw Equator EQ-ATS, Installation Manual, Page: 8 / 20

8
The EQ-ATS improves consistency and reliability of loading large parts into the working volume of the Equator
TM
gauging
system, as well as offering better access for loading parts to fixture plates outside the working volume.
The EQ-ATS transfers the loaded part from outside the Equator working volume into the working volume for inspection to take
place. Once inspected, the part is then transferred back outside the working volume to allow removal / replacement of the part.
The part can be loaded onto the EQ-ATS manually or by robot. The EQ-ATS suits parts and fixtures up to 10kg. Please contact
Renishaw if there is a requirement to support heavier parts.
The distance from the fixture plate to the top of the working volume, with a standard Ø5 mm x 21 mm long stylus, is;
• 114 mm for a standard height Equator 300 (the rack changing ability is limited with an ATS on a standard height Equator)
• 264 mm for an extended height Equator 300
The EQ-ATS can easily be integrated with either the Equator 300 or Equator 500 gauging system.
Equator 300 standard height
Equator 300 extended height
2. Product information
114 mm
264 mm