ATOM DX
linear installation guide
1
Product compliance
C
Renishaw plc declares that ATOM DX complies with the applicable standards and regulations.
A copy of the EU Declaration of Conformity is available from our website at
www.renishaw.com/productcompliance
FCC compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The user is cautioned that any changes or modifications not expressly approved by Renishaw plc
or authorised representative could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded cables must
be used with the unit to ensure compliance.
ATOM DX top exit readhead
The ATOM DX top exit readhead has been designed as a system component and to be compliant with
EMC regulations for products of its type. Care must be taken with shielding and grounding arrangements
to ensure EMC performance once installed. It is the system integrator’s responsibility to implement, test
and prove EMC compatibility for the whole machine
Patents
Features of Renishaw’s encoder systems and similar products are the subjects of the following
patents and patent applications:
CN1314511 EP1469969
EP2390045 JP5002559
US8987633 US8466943
CN101300463
EP1946048
JP5017275
US7624513
CN101310165 EP1957943
US7839296
CN105008865 US9952068 CN109477736
EP3465099 US2017203210
Disclaimer
RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT
IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS
REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY
INACCURACIES IN THIS DOCUMENT.
The use of this symbol on Renishaw products and/or accompanying documentation indicates that
the product should not be mixed with general household waste upon disposal. It is the responsibility
of the end user to dispose of this product at a designated collection point for waste electrical and
electronic equipment (WEEE) to enable reuse or recycling. Correct disposal of this product will help
to save valuable resources and prevent potential negative effects on the environment.
For more information, please contact your local waste disposal service or Renishaw distributor.
The packaging of our products contains the following materials and can be recycled.
Packaging Component
Material
ISO 11469
Recycling Guidance
Outer box
Cardboard
Not applicable
Recyclable
Polypropylene
PP
Recyclable
Inserts
Low Density Polyethylene Foam
LDPE
Recyclable
Cardboard
Not applicable
Recyclable
Bags
High Density Polyethylene Bag
HDPE
Recyclable
Metalised Polyethylene
PE
Recyclable
REACH regulation
Information required by Article 33(1) of Regulation (EC) No. 1907/2006 (“REACH”) relating to products
containing substances of very high concern (SVHCs) is available at:
Further information
Further information relating to the ATOM DX encoder range can be found in the ATOM DX
system Data
sheet (L-9517-9736), Advanced Diagnostic Tool ADTi -100 Data sheet (L-9517-9699), Advanced Diagnostic
Tool ADTi -100 and ADT View software quick-start guide (M-6195-9321), and the Advanced Diagnostic Tool
ADTi -100 and ADT View software user guide (M-6195-9413). These can be downloaded from our website at
www.renishaw.com /opticalencoders
and are also available from your local representative. This document
may not be copied or reproduced in whole or in part, or transferred to any other media or language, by any
means without the written prior permission of Renishaw. The publication of material within this document does
not imply freedom from the patent rights of Renishaw plc.
