Renfert Millo, Instruction Manual

Page: 23 / 148

- 9 - EN
E. Repair
Repairs should only be carried out by
qualified personnel.
Repairs to the electrical equipment,
which are not specified in these operating
instructions, should only be carried out by
an electrician.
F. Disposal instructions
The unit should be disposed of by a
specialist firm. The specialist firm should
be informed of any hazardous residue in
the unit.
F.1 Disposal instructions for
countries in the EU
To conserve and protect the environ-
ment, prevent environmental pollution and
improve the recycling of raw materials, the
European Commission adopted a directive
that requires the manufacturer to accept
the return of electrical and electronic units
for proper disposal or recycling.
Within the European Union units with this
symbol should not therefore be disposed
of in unsorted domestic waste:
For more information regarding proper
disposal please apply at your local authori-
ties.
G. Technical data
Rated voltage: 220 - 240 V, 50 / 60 Hz
120 V, 60 Hz
Power consumption: 120 VA (230 V)
130 VA (120 V)
max. permitted connected
load of the plug-in socket
(only Millo pro ): 2200 VA (230 V)
1300 VA (120 V)
Total connected load 2320 VA (230 V)
(only
Millo pro
) max.: 1430 VA (120 V)
Unit fuse T1AL, 250 VAC (230 V)
(only Millo ): T2AL, 250 VAC (120 V)
Rated speed: 2770 / 3350 rpm
(50 / 60 Hz)
LpA *) (idling): < 70 db(A)
Dimensions, without 214 x 207 x 252 mm
cutter (W x H x D): [8.4 x 8.2 x 9.9 inch]
Weight, approx.: 5.7 kg
[12.6 lbs]
*) sound pressure level in accord. with EN ISO 11202
H. Disclaimer
Renfert GmbH is not liable for claims for
compensation or claims under guarantee
if:
•
the product is used for purposes
other than those stated in the operat-
ing instructions.
•
the product is modified in any way –
apart from modifications described in
the operating instructions.
•
the product has not been repaired by
a specialist firm or original Renfert
replacement parts have not been
used.
•
there is continued use of the product
despite obvious safety defects or
damage.
•
the product has been subjected to
mechanical knocks or has been
dropped.