- 18 -
EN
Problem
Possible cause
Corrective action
Lamp does not
go on.
•
Power cord not plugged in.
•
Fluorescent tube defective.
• Faulty
electronics.
•
Fluorescent tube not prop-
erly seated in the socket.
•
Plug the power cord into the wall outlet.
•
Replace the fluorescent tube (refer to Sec. 5.6).
•
Call for service to replace the electronics, or refer to the spare
parts list.
•
Refer to Sec. 5.6, “Fluorescent Lamp Installation”.
Compressed air
leaking from the
foot switch.
•
Pneumatic hoses re-
versed.
•
Reverse the connections.
Foot switch fails
to switch on.
•
No pressure at the com-
pressed air connection.
•
Pneumatic hoses are
kinked.
•
Inspect the compressed air lines and/or the compressor.
•
Reposition the hoses.
Foot switch hoses
cannot be discon-
nected from the
unit.
•
Push-in connection is not
released (Fig. 1).
•
Press the push-in connection ring on the hose side firmly
while pulling on the hoses.
We reserve the right to make technical change
