Renfert 2921-0050, Manual

Page: 19 / 195

EN - 1 -
Introduction
We are pleased with your decision to purchase
Silent TS laboratory dust extractor.
This device sets a new standard with regard to func-
tionality, performance, and ergonomics.
Please read the following operating instruc-
tions carefully and observe the information
they contain in order to ensure a long and
trouble-free service life.
Symbology
The following symbols are employed in these
instructions and on the unit itself:
Danger
This indicates a direct risk of injury.
Electrical current
This indicates a hazard due to electrical
current.
Attention
Failure to observe the associated informa-
tion can result in damage to the unit.
Note
This provides the operator with useful infor-
mation to make working with the unit easier.
Only intended for indoor use.
Before opening the unit, disconnect it from
the mains power supply by unplugging the
power cord from the wall outlet.
Burn hazard
Hot surface or objects.
Observe the operating instructions.
Other symbols are explained as they occur.
Silent TS
Nr. 2921-0050 / 2921-1050
ENGLISH
Introduction ........................................................1
Symbology .........................................................1
Information for Operators ..................................2
Operating Instructions
1. Setup and Commissioning ............................2
1.1 Setup ............................................................ 2
1.2 Connection to the Extraction Point ............... 2
1.3 Electrical Connection ................................... 2
1.4 Connecting electrical equipment .................. 2
1.5 External Exhaust Air Route .......................... 3
2. Operation ......................................................3
2.1 Operating Elements .................................... 3
2.2 Switching the Unit ON / OFF ........................ 3
2.3 Adjusting and Displaying the Extraction
Force ................................................................... 3
2.4 Continuous Operation ................................. 3
2.5 Automatic Mode ........................................... 4
2.6 Adjusting the Automatic Start Feature .......... 4
2.7 "Change Filter" - Indicator ............................ 4
2.7.1 Adjust the sensitivity of the „Replace filter“ indicator. ..... 4
2.7.2 Activating / deactivating the „Replace filter“ indicator
tone ................................................................................ 4
3. Cleaning / Maintenance ................................5
3.1 Seals ............................................................ 5
3.2 Replacing the Dust Bag ............................... 5
3.3 Filters ........................................................... 5
3.3.1 Replacing the Fine Particle Filter ................................... 5
3.3.2 Replacing the Exhaust Filter .......................................... 5
3.3.3 Replacing the Electronics Filter ...................................... 6
3.4 Fuses ........................................................... 6
3.5 Self-diagnosis ............................................... 6
3.6 Replacing the Suction Turbine ..................... 6
3.7 Replacing the Exhaust Air Labyrinth ............ 7
4. Spare Parts ...................................................7
5. Standard Delivery .........................................7
6. Delivery Versions ..........................................7
7. Accessories ..................................................7
8. Error List .......................................................8
Information for Operators
A. Application Area ..........................................10
A.1 Proper Use ................................................. 10
A.2 Ambient Conditions
(in accordance with DIN EN 61010-1) ............... 10
B. Hazard and Warning Information ................10
C. Authorised Individuals .................................11
D. Preparations Prior to Starting .....................11
D.1 Connecting the Dust Extractor ................... 11
D.2 Connecting a Dust-Generating Device ....... 11
E. Repairs .......................................................12
F. Disposal Information ...................................12
F.1 Disposing of Consumables ........................ 12
F.2 Disposing of the Unit .................................. 12
F.3 Disposal instructions for countries in the EU ..
12
G. Technical Specifications ..............................12
H. Liability Exclusion .......................................12
I. Warranty .....................................................12
Content