5
1.800.627.4499
TC7D Series Digital Time Clock
ACCESSORY
DIMENSIONS ARE APPROXIMATE.
.8750
1.250
7.0 ACCESS
2.750
.940
1.250
6.150
2.060
4.120
1.250
2.500
8.040
ISOMETRIC VIEW
FRONT VIEW
.955
.938
1.875
ø0.8750
Knockout
ø1.1250
Knockout (5)
ø0.2580
Thru
SETTINGS
FIGURE 1.2.1 TC7D-E ENCLOSURE DIMENSIONS
Set Time and Day
Slide Set switch to
press 1…7 button until arrow points to the correct day
(1=Monday). Press h then m buttons to set correct time. PM indicator shows
noon to 11:59 PM. Slide Set switch to Run. Clock colon will blink.
Set Switch “On” Cycle
Slide Set switch to . A “1” indicates the first switch cycle and a “Bulb”
indicates a switch-on (circuit closes). Press 1…7 button until arrows point to
selected day(s) for this cycle. Press h and m buttons to show switch-on time,
noting PM indicator.
Set Switch “Off” Cycle
With Set switch at , press button, note switch cycle number changes to
“2” and bulb blanks, indicating switch-off (circuit opens). Press 1…7 button
to match day(s) set for switch cycle “1.” Press h and m buttons to select
switch-off time.
Autorun
Slide Set switch to Run and Mode switch to Auto, switching begins with next
switch-on set time.
Override “On”
Slide Mode switch to I. Switch remains on indefinitely (circuit closed).
Override “Off”
Slide Mode switch to O. Switch remains on indefinitely (circuit open).
Skip Cycle
In automatic run mode, press x
→
button. The next calendar day is skipped.
Setting ERROR
If EEE appears, a setting error exists. The switch cycle number in error is
shown. Slide set switch to , press button until cycle is shown, review
this and the following setting to correct error, slide set switch to Run.
Clear any setting
Setting slide set switch to , press button to show switch cycle to clear.
Press the button and the skip (x) button simultaneously, hold for several
seconds.
Clear All
To erase all settings, Press R.
2.0 SETTINGS
2.1 SETTING INSTRUCTIONS
FIGURE 2.1.0 SETTING INSTRUCTIONS
